Settings – Transport label

Document

In this field you select the transport label that should apply for the transport label prior to reporting.

Transport label

Here you select the type of transport label you want to print. The types (the formats) which can be selected among are A4, A5, or Label (76 x 51 mm). This setting will also be used as a fallback value if no transport label is selected for the part in the part register. The default option is Transport label – A4.

Use the part's default transport label

With this setting you decide if the part's default transport label should be used for printout. If you uncheck the checkbox, the previous setting will be used as the transport label for all parts, regardless of the settings registered for each individual part in the Part register procedure.

The default transport label is configured under the Manufacturing tab in the Part register procedure.

Document variant

If you want to print another document variant than the default variant, you can select it here. The document variants are handled in the Document templates procedure.

If you in the procedure Document templates choose the module Manufacturing, you can add variants which will then become possible to use for this printout. These variants should be added for the document types Transport label, manufacturing, prior to reporting – A4, A5 and Labels.