Pre-calculation

When pre-calculating a configured part there are two methods to choose from: With configuration and without configuration.

With configuration

If you have certain standard options which are included in the part's basic price, the pre-calculation is most of the times done with configuration and a default template. Then you select Complete in the Configuration field in the settings for the pre-calculation.

When you have loaded the list with the part, you get to configure the part under the Configured button . When the part has a configuration, the button is shown with an orange puzzle piece .

You then start the pre-calculation as usual by clicking the button Start calculation on the toolbar of the procedure.

Without configuration

If you instead have entered a price for each option, including the standard options, a pre-calculation is in most cases made without configuration. Then you select No in the Configuration field in the settings for the pre-calculation.

You directly start the calculation after you have loaded the list, provided that you do not want to change any other information in the list prior to the calculation.